Free Delivery on all Online Orders Over £50 +vat

Excluding Panels & Doors and subject to t&c's.

Article successfully added.

PVC T-Bar Beech 18.5mm

PVC T-Bar Beech 18.5mm
  • 111313
  • T53418L150M90
  • 1 m
Product Details Ideal for personalising any piece of furniture Available from 7mm width... more
Width: 18.5mm
Colour: Beech

Product Details

  • Ideal for personalising any piece of furniture
  • Available from 7mm width
  • Vast range of profiles to choose from
  • Colour matching on request
  • Shore Hardness 90
HOW TO APPLY T-BAR Step 1 Carefully measure the T-Bar profile and barb prior to... more

HOW TO APPLY T-BAR

Step 1

Carefully measure the T-Bar profile and barb prior to machining as these dimensions can vary from batch to batch. Also do the same with the boards as these too are manufactured to within specific tolerances.

111207

Step 2

Machine the correct groove width and depth both into the board and from the face surface. The width of the groove should be approximately 0.5mm less.
It is recommended you experiment before machining the full production. The groove width may also give varying results when using different types of board such as MDF, Chipboard etc, this is why testing before production machining is important.

111207-2

Step 3

To fit the profile you simply knock-in the T-Bar using a soft head hammer. Depending on the size and shore hardness of the profile you can also soften the material by storing in a warm environment for a short time. This will especially help when applying woodgrain or large profiles and also if you are working on a shaped panel. When the profile cools, it will return to it’s original shore hardness.

111207-1