The Machine Glues Tapes for Lateral use with Edgebanders for Pre-Glued Tapes

Low maintenance, hot melt edge pre-gluer for pre-gluing materials such as: plastic or wood laminate strips, layered strips, 0.4 to 2 mm PVC edges, ABS, polyester, melamine or wood veneer tapes. The machine glues tapes for later use with edgebanders for pre-glued tapes, as manufactured by Virutex, or with any hot air edgebanding machines. It has thermoelectric temperature control, automatic start and stop of the feed motor, depending on the glue temperature, and an accurate dosage mechanism which dispenses the exact amount of glue to obtain the required density on the back of the tape. It consumes between 160 and 200 g of glue per sqm. It has a built-in manual winder which lets the original roll easily unwind and then rewinds it with the tape already glued and ready for use. Using the optional kit, two similar tape rolls can be pre-glued at the same time.

Specifications

• Input Power: 1.720 watts
• Min. tape thickness: 0.4mm
• Max tape thickness (strip): 16mm
• Max tape thickeness (roll): 2mm
• Max tape width: 104mm
• Feeding speed: 8.5 m/min
• Tank capacity: 2kg de cola
• Weight: 26kg

Standard Equipment

• Manual winder
• 2 multidiameter reel centering devices
• 1kg of glue
• Cardboard roll centre ring

Please find attached Operating and Technical Information for the PR25P Pre-Gluer for Tapes.

• PR25P 2500700 & PR25P-DV B FROM SERIAL NO 1111 TECH INFO
• PR25P 2500700 & PR25P-DV A TECH INFO
• PR25P 2500600 B FROM SERIAL NO 1111 TECH INFO
• PR25P 2500600 A TECH INFO
• PR25P 2500500 B FROM SERIAL NO 1101 TECH INFO
• PR25P 2500500 A TECH INFO
• PR25P OPERATING INSTRUCTIONS
• PR25P 2500700 DV259 MOTORISED WINDER B TECH INFO
• PR25P 2500700 DV259 MOTORISED WINDER A TECH INFO
• PR25P 2500600 DVM25P MANUAL REEL B TECH INFO
• PR25P 2500600 DVM25P MANUAL REEL A TECH INFO