Product Details

• For use on the back of the rear panel
• For rail and hook suspension
• Load capacity: 45 kg / each in accordance with EN 15939 in test frame A
• Attached to side panel with 3 side pins
  and screwed down in the rear panel groove
• Suitable for use with rear panel recess of 16 mm and over
• Fast, easy height adjustment by means of sturdy
  adjustment screw and gear: ± 8 mm
• Depth adjustment: 25 mm max.
• Side adjustment: ± 3 mm for hook suspension
• Adjustment screws are protected from becoming unscrewed accidentally
• Lift off height: 7.5 mm
• Hook suspension: the closed shape of the hook
  prevents the cabinet from slipping off
• Suitable for use with B type suspension rail
• Galvanised steel - fully recyclable
• MUST ALWAYS be screwed into the cabinet body side.
• Optional "lift off guard" function by means of special screw

Important advice:

Please call our Sales Team on 024 7630 81000 to order SAH 215 cover caps quoting the following references

• 79718 Ø 12mm White
• 79719 Ø 15mm White
• 79722 Ø 12mm Grey
• 79723 Ø 15mm Grey

Information on Load Capacity of Cabinet Suspension Brackets and on Accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

• Both the furniture design and the quality of the furniture's material and production are beyond our control.
• The quality and condition of wall materials are also beyond our control.
• The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
• Commercial type special mounting elements must be used for attachment to other wall materials.
• Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
• Mounting suspension rails:
  - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet suspension bracket
  - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
• Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
• The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.